Guild Engineering is engaged in the service of leveling of crane tracks cranes, and the complex also includes leveling crane paths, we define the desired periodicity, the periodicity
Industrial cranes are an integral part of any production. Depending on the mechanism, as well as the application they can be re-loaders, tower cranes, gantry or overhead. It is overhead cranes are widely spread in the industry. They are frequently used in various shops. A bridge crane is used for lifting large weight and size, and differs in that the load thereon is moved in the horizontal plane. With such a stationary crane, bridge or beam which may have a length from one end of the shop to another, you can easily move the required load.
So that the operation of this device was safe and effective, it is necessary to properly perform the installation process, as well as conduct periodic audits of its operation. Special attention should be paid to the correct position, crane tracks. For this purpose geodetic control methods. In the process of implementation can promptly find faults and inaccuracies, and quickly to eliminate them.
For control is performed geodetic survey, which you can see all the parameters and to detect deviations from the norm. Such deviations can be extended or, on the contrary wife of the track rails; different indicators when measuring axial distances; the excess of one rail above the other. To investigate the presence of excess using the effective geodesic method is leveling.
Leveling of crane tracks cranes aims to study the main characteristics of crane tracks, as well as to identify deviations in position. It also helps to identify where there appeared an offset or gap rail joints. All deviations associated with the excess of the indicators between the two elements of crane tracks can be identified using this procedure. In order leveling was done as accurately as possible, it is necessary to conduct pre and other geodetic works, including the above shot. This will allow experts to have complete information about the entire crane structure, its condition at the time of execution. All information obtained in the course of surveying, as well as the leveling should be taken into account and are decorated in a tabular form. In the data tables contain data that is currently available and marked all the deviations that occur on the object.
it is Worth saying that holding such a diligent and responsible work must be carried out only by qualified professionals who not only have extensive experience, use software and equipment of high precision and quality, but also have official permission to perform such works - the license certificate. Our company is an official, honest and works exclusively on a contractual basis. This is the pledge and guarantee of our quality and honest work performed.
Leveling runways, bridge crane it is necessary to make from time to time. Such work must correspond to the operating schedule. The need for leveling the crane tracks occurs when the geometric parameters of the crane paths have changed. To fix this error carried out engineering and surveying work. Crane track leveling should be carried out not less often than once a month. The results of the work should be recorded in a special journal. During the measurements the crane runway bridge crane are determined by such parameters: slope gauge, butt gaps, elevation.
The company "Guild Engineering" provides leveling of the crane track crane and tower and gantry type. Our professional surveyors and specialized equipment allow us to work efficiently and quickly.